Professional supplier of Gas Generators
On-site gas generation has shown many advantages over pressure gas canisters in laboratories: it is cost-effective by offering continuous nitrogen and avoiding cumbersome canisters, rental or high logistic costs. But it is also safer (lower volume and pressure) and a greener solution.
In many manufacturing processes, the use of nitrogen is crucial to success. From food and beverage manufacture, winery, oil and gas processes such as nitrogen blanketing and gas purging, different volumes of nitrogen are needed to facilitate these processes.
Nitrogen is used in many areas of the food industry. Contact with oxygen must be avoided in various production steps in the manufacturing of beverages such as fruit juice and beer. In this context, there is a risk of microbial contamination as well as oxidative and enzymatic reactions. This can lead to quality losses or to spoilage of the beverages.
Nitrogen is used in different AM-Processes, production and storing of metal powder. In AM-Processes, there is controlled by Energy deposition, especially by “Powder Bed Fusion” (Electron Beam Melting, Selective Laser Sintering, Direct Metal Laser Melting, Selective Laser Melting, Binder Radiation) a purity of 99,5% – 99,99995% nitrogen is typically used.
Electronics manufacturers can reduce running costs in production by using nitrogen generated in-house. Electronic assemblies are often manufactured using the wave soldering, selective soldering and reflow processes. A shielding gas atmosphere composed of nitrogen helps to ensure product quality.
A nitrogen dry sprinkler system uses a series of piping to provide water when needed, to extinguish a fire. The sprinkler lines are filled with nitrogen to prevent corrosion when not in use. This makes nitrogen sprinkler systems different from wet sprinkler systems that are filled with water and dry air sprinklers that are filled with compressed air.
Only the best and fastest service is good enough, the sooner you contact us the better.
You can trust that we do our utmost to solve your challenge as fast as possible.
We offer full service of our products either directly with us or via certified service partners
You are only as good as a combination of your products and services.
Last updated: October 18, 2021
The words of which the initial letter is capitalized have meanings defined under the following conditions. The following definitions shall have the same meaning regardless of whether they appear in singular or in plural.
Account means a unique account created for You to access our Service or parts of our Service.
Company (referred to as either “the Company”, “We”, “Us” or “Our” in this Agreement) refers to Flairmo ApS, Lundeborgvej 3, 9220 Aalborg Ø.
Cookies are small files that are placed on Your computer, mobile device or any other device by a website, containing the details of Your browsing history on that website among its many uses.
Country refers to: Denmark
Device means any device that can access the Service such as a computer, a cellphone or a digital tablet.
Personal Data is any information that relates to an identified or identifiable individual.
Service refers to the Website.
Service Provider means any natural or legal person who processes the data on behalf of the Company. It refers to third-party companies or individuals employed by the Company to facilitate the Service, to provide the Service on behalf of the Company, to perform services related to the Service or to assist the Company in analyzing how the Service is used.
Usage Data refers to data collected automatically, either generated by the use of the Service or from the Service infrastructure itself (for example, the duration of a page visit).
Website refers to Flairmo, accessible from flairmo.dk
You means the individual accessing or using the Service, or the company, or other legal entity on behalf of which such individual is accessing or using the Service, as applicable.
While using Our Service, We may ask You to provide Us with certain personally identifiable information that can be used to contact or identify You. Personally identifiable information may include, but is not limited to:
First name and last name
Address, State, Province, ZIP/Postal code, City
Usage Data is collected automatically when using the Service.
Usage Data may include information such as Your Device’s Internet Protocol address (e.g. IP address), browser type, browser version, the pages of our Service that You visit, the time and date of Your visit, the time spent on those pages, unique device identifiers and other diagnostic data.
When You access the Service by or through a mobile device, We may collect certain information automatically, including, but not limited to, the type of mobile device You use, Your mobile device unique ID, the IP address of Your mobile device, Your mobile operating system, the type of mobile Internet browser You use, unique device identifiers and other diagnostic data.
We may also collect information that Your browser sends whenever You visit our Service or when You access the Service by or through a mobile device.
Cookies can be “Persistent” or “Session” Cookies. Persistent Cookies remain on Your personal computer or mobile device when You go offline, while Session Cookies are deleted as soon as You close Your web browser. You can learn more about cookies here: Cookies by TermsFeed Generator.
We use both Session and Persistent Cookies for the purposes set out below:
Necessary / Essential Cookies
Type: Session Cookies
Administered by: Us
Purpose: These Cookies are essential to provide You with services available through the Website and to enable You to use some of its features. They help to authenticate users and prevent fraudulent use of user accounts. Without these Cookies, the services that You have asked for cannot be provided, and We only use these Cookies to provide You with those services.
Cookies Policy / Notice Acceptance Cookies
Type: Persistent Cookies
Administered by: Us
Type: Persistent Cookies
Administered by: Us
Purpose: These Cookies allow us to remember choices You make when You use the Website, such as remembering your login details or language preference. The purpose of these Cookies is to provide You with a more personal experience and to avoid You having to re-enter your preferences every time You use the Website.
The Company may use Personal Data for the following purposes:
To provide and maintain our Service, including to monitor the usage of our Service.
To manage Your Account: to manage Your registration as a user of the Service. The Personal Data You provide can give You access to different functionalities of the Service that are available to You as a registered user.
For the performance of a contract: the development, compliance and undertaking of the purchase contract for the products, items or services You have purchased or of any other contract with Us through the Service.
To contact You: To contact You by email, telephone calls, SMS, or other equivalent forms of electronic communication, such as a mobile application’s push notifications regarding updates or informative communications related to the functionalities, products or contracted services, including the security updates, when necessary or reasonable for their implementation.
To provide You with news, special offers and general information about other goods, services and events which we offer that are similar to those that you have already purchased or enquired about unless You have opted not to receive such information.
To manage Your requests: To attend and manage Your requests to Us.
For business transfers: We may use Your information to evaluate or conduct a merger, divestiture, restructuring, reorganization, dissolution, or other sale or transfer of some or all of Our assets, whether as a going concern or as part of bankruptcy, liquidation, or similar proceeding, in which Personal Data held by Us about our Service users is among the assets transferred.
For other purposes: We may use Your information for other purposes, such as data analysis, identifying usage trends, determining the effectiveness of our promotional campaigns and to evaluate and improve our Service, products, services, marketing and your experience.
We may share Your personal information in the following situations:
The Company will also retain Usage Data for internal analysis purposes. Usage Data is generally retained for a shorter period of time, except when this data is used to strengthen the security or to improve the functionality of Our Service, or We are legally obligated to retain this data for longer time periods.
Your information, including Personal Data, is processed at the Company’s operating offices and in any other places where the parties involved in the processing are located. It means that this information may be transferred to — and maintained on — computers located outside of Your state, province, country or other governmental jurisdiction where the data protection laws may differ than those from Your jurisdiction.
Under certain circumstances, the Company may be required to disclose Your Personal Data if required to do so by law or in response to valid requests by public authorities (e.g. a court or a government agency).
The Company may disclose Your Personal Data in the good faith belief that such action is necessary to:
The security of Your Personal Data is important to Us, but remember that no method of transmission over the Internet, or method of electronic storage is 100% secure. While We strive to use commercially acceptable means to protect Your Personal Data, We cannot guarantee its absolute security.
Our Service does not address anyone under the age of 13. We do not knowingly collect personally identifiable information from anyone under the age of 13. If You are a parent or guardian and You are aware that Your child has provided Us with Personal Data, please contact Us. If We become aware that We have collected Personal Data from anyone under the age of 13 without verification of parental consent, We take steps to remove that information from Our servers.
If We need to rely on consent as a legal basis for processing Your information and Your country requires consent from a parent, We may require Your parent’s consent before We collect and use that information.
We have no control over and assume no responsibility for the content, privacy policies or practices of any third party sites or services.
By email: email@example.com
By phone number: +45 53 71 72 20
Last updated: October 18, 2021
1.1. Buyer’s acceptance of the offer from FLAIRMO ApS shall also mean acceptance of the General Conditions of Sale and Delivery set out below, which shall apply to the extent they are not deviating from any agreement in writing between the parties.
2.1. Information relating to technical specifications and prices indicated in manuals, leaflets, circulars, advertisements etc. are indicated as guidelines.
2.2. FLAIRMO ApS reserves the copyright and property of drawings, technical information, etc. submitted in connection with offers/contracts,
and of patents, trademarks, name of products, referring to the products sold FLAIRMO ApS.
2.3. FLAIRMO ApS reserves the right to modify the construction and technical specifications without notice.
3.1. In case inspection, and/or tests are required, these will be carried out at the plant in Aalborg, and the costs for such inspection shall be borne by the buyer.
3.2. In case approvals – other than those already carried out by FLAIRMO ApS – are required, the buyer shall give all necessary information and assistance, and he shall bear the corresponding costs.
4.1. The time indicated for delivery is the date at which the product are shipped from the plant in Aalborg. In case of delay, due to reasons other than those mentioned under Article 8 “Reliefs”, FLAIRMO ApS shall forthwith inform the buyer, and state the new date of dispatch, without this giving the buyer right to compensation or to cancel the contract.
4.2. In case the buyer anticipates that he will be unable to accept the delivery of the products, he shall forthwith inform FLAIRMO ApS, stating a new date for the delivery. In case the buyer fails to accept the delivery for reasons other than those mentioned under Article 8 “Reliefs”, FLAIRMO ApS shall be entitled to compensation for the loss suffered by reason of the buyer’s default.
4.3. Terms of delivery are Ex-works (EXW)
4.4. The risk shall pass in accordance with the International Rules for Interpretation of Trade Terms (INCOTERMS) in force at the date of formation of the contract. In case of EXW delivery, the risk will pass not later than when the products are handed over to the first carrier.
5.1. The payment shall be made according to the terms agreed between the parties. Where it is agreed that any part of the purchase shall fall due for payment only after the delivery, the buyer shall take out the usual transport insurance in respect of the products sold, for full value, and maintain such policy in force until payment has been made in full.
5.2. The goods shall remain the property of FLAIRMO ApS until payment has been made in full. In the case of delayed payment by the buyer, FLAIRMO ApS is entitled to charge interest for default, at a rate of 9 percentage points above official rate of discount of the Denmark’s National Bank.
5.3. In the event that after entering the contract, or after issuing the price list, custom export/import duties or other additional charges or costs directly caused by Government measures taken in Denmark or abroad, are imposed on raw materials, machinery components, etc. required for the performance of the contract – or in case collective bargaining results in increases in wages for instance, the buyer shall be liable to pay such increase over and above the price agreed.
5.4. Where the purchase price is agreed in a currency other than EURO, FLAIRMO ApS shall be entitled to adjustment of the purchase price in the event of any alteration to the rate of exchange of the agreed currency relative to EURO.
6.1. FLAIRMO ApS shall not be liable for any damage to property caused by the products after they have been delivered and whilst they are in the possession of the buyer. Nor shall FLAIRMO ApS be liable for any damage to products manufactured by the buyer, or to products of which the FLAIRMO products form a part.
6.2. If FLAIRMO ApS incurs liability towards any third party for such damage to property as described under 6.1. the buyer shall indemnify, defend and hold FLAIRMO ApS harmless.
6.3. FLAIRMO ApS and the buyer shall be mutually obliged to let themselves be summoned to the Court of Aalborg, Denmark examining claims for such damages.
6.4. The limitation of FLAIRMO ApS’s liability in 6.1. above shall not apply where FLAIRMO ApS has been guilty of gross negligence.
6.5. Save as elsewhere stated in these conditions, there shall be no liability for either party towards the other party for loss of production, loss of profit, loss of use, loss of contracts or for any consequential, economic or indirect loss whatsoever.
7.1. Provided that the operational instructions have been carried out, and unless otherwise agreed, the duration of the guarantee is the period stipulated for each type of products, calculated from the date of shipment from the plant in Denmark. The guarantee applies to any faulty material or workmanship in new material.
7.2. Any guarantee claim will only be accepted if the claim is given in writing according to the procedure set up by the Quality Control Department of FLAIRMO ApS.
7.3. Normal wear and tear or deterioration shall not be termed as “defect”.
7.4. Modifications carried out by the buyer, without prior agreement in writing from FLAIRMO ApS, damages caused by violence, misuse, lack of repair and maintenance, incorrect repairs or use of unoriginal spare parts/oil, are not covered by the guarantee.
7.5. Costs of transportation of parts/equipment, travelling expenses/wages of the buyer´s technicians, are not covered by the guarantee.
7.6. On receipt of the claim, FLAIRMO ApS shall forthwith send replacement or repaired parts/equipments.
7.7. In case the replacement parts/equipment are shipped prior to the returning of the defective parts/equipment to FLAIRMO ApS, these will be invoiced – and credited in case the claim is accepted under the guarantee.
7.8. In case the defective parts/equipment are returned to FLAIRMO ApS prior to the replacement/repair, these parts/equipment shall be repaired or replaced, and returned to the buyer, free of charge (except 7.5. above) in case the claim is accepted under the guarantee.
8.1. Industrial disputes, fire, mobilisation, requisition, embargo, currency restrictions, insurrection, strike, lock-out, shortage of transport, general shortage of materials, restrictions in the use of power or other circumstances which are beyond the control of the parties, shall be considered as cases of relief, in case they intervene after the formation of the contract, and impede its performance.
8.2. The party wishing to claim relief by reason of any of the mentioned circumstances, shall notify the other party in writing without delay, on the intervention and on the cessation thereof. The right of suspension of the contract shall only apply in case the effect of above reliefs could not have been foreseen at the time of the formation of the contract.
8.3. If Force Majeure prevents the buyer from fulfilling his obligations, he shall compensate FLAIRMO ApS for expenses incurred in securing and protecting the products.
8.4. In case the performance of the contract is suspended more than six months due to the conditions named under 8.1. above, either party shall be entitled to terminate the contract by notice in writing to the other party.
9.1. The Danish Law shall govern any question that might arise in connection with the business between FLAIRMO ApS and the buyer.
9.2. Danish Law shall determine any conflict. The court in Aalborg, Denmark shall settle any dispute.
If you have any questions about Terms & Conditions, You can contact us: